Table of Contents
Advertisement
This appliance must be built in, oth-
erwise it could tip up.
Keep the appliance door(s) shut until
the appliance has been built in and
secured in its housing in accordance
with these operating and installation
instructions.
Fire risk and danger of damage!
This appliance must not be installed
underneath a hob.
Side-by-side combinations
As a general rule, refrigerators and
freezers should not be installed vertic-
ally or horizontally next to other such
appliances so as to avoid a build-up
of condensation between them and
the damage this can cause.
Your refrigeration appliance must not be
installed next to another refrigeration
appliance ("side-by-side"), or above an-
other one, because it is not equipped
with built-in heating units in the side
panels.
It can, however, be installed next to an-
other refrigeration appliance with built-
in heating as long as they are in separ-
ate niches. Please contact your Miele
retailer to find out which appliances are
suitable for this method of installation.
Location
This appliance should be installed in a
dry, well-ventilated room.
When deciding where to install your re-
frigeration appliance please bear in
mind that it will use more energy if in-
stalled near to a heater, a cooker or
other appliance that gives off heat. Dir-
ect sunlight should also be avoided.
The higher the room temperature, the
longer the compressor runs and the
higher the energy consumption is.
When installing the appliance, please
note:
– The socket must be easily accessible
in an emergency, not concealed be-
hind the appliance.
– The plug and cable must not touch
the rear of the appliance as they
could be damaged by vibrations from
the appliance.
– Do not plug in other appliances be-
hind this appliance.
Installation
63
Hide quick links:
Advertisement
Table of Contents
