Connection - Sony EVI-D70 Technical Manual

1) When the camera is connected to a computer with a VISCA cable (cross type, RS-232C), you can operate
the camera with the computer. To obtain a cable, consult the dealer where you bought your camera.
2) For more detail on the VISCA RS-422 connection, see page 36.
Notes
• You cannot connect your Color Video Camera to a
computer that is not equipped with either video input or an
S-Video input connector. You might not be able to use
your existing computer with your Color Video Camera
unless you provide the computer with a video capture
board and/or software. Consult your computer dealer or
manufacturer for details.
• Use only the AC power adaptor (MPAAC1) supplied with
the unit. Do not use any other AC power adaptor.
Video cable
(not supplied)
to VIDEO
S-Video cable
(not supplied)
to S VIDEO
VISCA cable
(not supplied)
to VISCA RS-232C IN
to VISCA
RS-232C OUT
to VISCA RS-422
to DC IN 12V

Connection

to Video
input
to
S-Video
input
1)
to RS-232C
To VISCA IN of
other EVI-D70/
D70Ps (when Computer, TV or
connecting to more
VCR with a video
than one camera)
input jack
2)
AC power adaptor
MPA-AC1 (supplied)
Power cord (supplied)
• Do not make VISCA RS-232C and RS-422 connections at
the same time, as this may cause malfunctions.
Connection
to AC outlet
Polarity of the plug
4