Tracking a Subject Automatically
(continued)
Fine-tuning the setting
Changing the frame position
Although the frame normally appears on the middle
of the screen, you can change its position to a
different place. (In the CHASE 1 mode, the frame
tracks a subject within the range of the screen.)
1
1
Press the AT ON/OFF button to enter
into the AT setting mode.
The frame and setting value appear. If the
setting value does not appear, press the DATA
SCREEN button to have the value displayed.
AT MODE
SETTING
CHASE 1
2
Press the OFF SET button to enter into
the AT frame position setting mode.
AT MODE
SETTING
CHASE 1
EN
16
2,4
P-T DRIVE
ENTRY1
32
Frame
FRAME DRIVE
ENTRY1
32
3
Press the arrow button to move the frame
to a desired position.
AT MODE
SETTING
CHASE 1
4
Press the OFF SET button to fix the
frame position.
AT MODE
SETTING
3
CHASE 1
After the setting is completed, go back to the
step 2 of "Tracking a subject automatically."
FRAME DRIVE
ENTRY1
30
P-T DRIVE
ENTRY1
30