Operation; To Switch On The Product; Operating Modes - Husqvarna Automower 535 AWD Operator's Manual

4.1 To switch on the product

WARNING: Read and understand the
safety chapter before you switch on
the product.
1. Push the On/Off button.
Note: Make sure that the stop button is
pushed down. If the stop button is not
pushed down a stop symbol will appear on
the display.
2. Pair the product with the Automower
Connect app.
®
3. Use the Automower
the PIN code. The correct PIN-code must be
entered to get access to the Menu structure
of the product. If the incorrect PIN-code is
entered 5 times, the product is locked for a
time. The lock is extended for each new
incorrect try.
4. Select the desired operating mode in the
®
Automower Connect app. Refer to
Operating modes on page 26 .
5. Push the START button to start the product.

26 - Operation

4 Operation
®
Connect app to enter
If the product is parked in the charging
station, it will only leave the charging station
when the battery is fully charged and if the
timer is set to allow the product to operate.

4.2 Operating modes

®
In the Automower Access menu the following
operation modes can be selected:
• Main area
• Secondary area
• Park
4.2.1 Main area
Main area is the standard operating mode where
the product mows and charges automatically.
4.2.2 Secondary area
Secondary area mode, the product
In the
operates for a chosen period of time or until the
battery is empty.
Note: It is recommended to change the operation
selection to Main area before placing the product
in the charging station.
4.2.3 Park
Park mode is selected the following
When the
operation selections can be chosen:
• Park until further notice
• Park for a specific number of hours
1055 - 001 - 04.02.2019