Table Of Contents - Cisco CWDM-CHASSIS-2 Installation Notes

Contents
Contents
This installation note contains the following sections:
•
•
•
•
•
•
•
Overview
The Cisco EWDM passive optical system provides optical networking support for high-speed data
communication at 10 GBps for metropolitan area networks (MANs) using CWDM and DWDM optical
wavelengths in both ring or point-to-point configurations.
The Cisco EWDM passive optical system includes these components:
•
•
•
CWDM Two-slot Chassis
The CWDM Two-slot chassis (CWDM-CHASSIS-2) is a standard 19-inch chassis that is one rack unit
(RU) in height. Each CWDM two-slot chassis can hold two OADM modules or one OADM and an
optical amplifier. You can install the CWDM two-slot chassis in the same equipment rack as your other
switching equipment or in an adjacent rack.
Cisco Enhanced Wave Division Multiplexing Optical System Installation Note
2
Overview, page 2
Safety Overview, page 15
Installing the EWDM Passive Optical System, page 21
Connecting the EWDM Passive Optical System to Your System, page 24
Specifications, page 29
Translated Safety Warnings, page 33
Obtaining Documentation and Submitting a Service Request, page 41
Two-slot chassis
OADMs
- Eight-channel
Four-channel
-
Two-channel
-
An optical amplifier
78-17894-02