Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for AEG FM2500DD-A
Summary of Contents for AEG FM2500DD-A
- Page 1 FM2500DD-A User manual Down draught extractor...
-
Page 2: Table Of Contents
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruc- tion manual carefully. It will enable you to navigate all processes perfectly and most ef- ficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. -
Page 3: Operating Instructions
Operating Instructions Operating Instructions Safety instructions Please comply with these instructions. If you do not, any damage resulting is not cov- ered by the warranty. Correct use • This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely. -
Page 4: Description Of The Appliance
Description of the Appliance Description of the Appliance Cooking surface layout Filter Upper casing Frontline strip Control panel Shaft of down draught extractor Control panel layout Fan level display Timer indicator Fan level selection Position selection On/Off Intensive fan Timer... -
Page 5: Operating The Appliance
Operating the appliance Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields. Sensor field Function On / Off... -
Page 6: Setting Position Of Down Draughtextractor
Operating the appliance Setting position of down draught extractor Increasing extractor position Control panel Position of extractor Step Touch once Middle Touch Fan level 1 is switched on. Reducing extractor position Control panel Position of extractor Step Touch Middle/bottom The appliance switches off in the lowest position. Retaining extractor position Control panel Position of extractor... -
Page 7: Using The Timer
Cleaning and Care Using the timer After the time set has elapsed, the suction switches off. The down draught extractor re- mains in the top position. Setting the time Step Control panel Display Touch once seconds Touch for longer (5 minute increments for easier setting) The time is set. - Page 8 Cleaning and Care Upper housing 1. Switch on down draught extractor and move to the top position. 2. Remove upper housing. 3. Wipe the appliance with a damp cloth and a little washing up liquid. 4. Dry the appliance using a clean cloth. Filter After 30 hours of operation the filter must be cleaned, 0 appears.
-
Page 9: What To Do If
What to do if … What to do if … Problem Possible cause Remedy The appliance cannot be More than 10 seconds have Switch appliance on again switched on or is not operat- passed since the appliance was switched on Several sensor fields were Only touch one sensor field touched at the same time... -
Page 10: Disposal
Disposal Disposal Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the pack- aging materials in the appropriate container at the community waste disposal facilities. Old appliance The symbol on the product or on its packaging indicates that this product may not... -
Page 11: Installation Instructions
Installation Instructions Installation Instructions Safety instructions Warning! This must be read! The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. - Page 12 Installation Instructions Important: Official regulations must be followed when drawing off exhaust air. Important: Do not conduct exhaust air to a chimney which is used by appliances operat- ed with gas or other combustible fuels. Installing next to a gas appliance Important: The appliance must not be built in between two gas appliances.
-
Page 13: Assembly
Assembly Assembly min. 500 mm... - Page 14 Assembly...
-
Page 15: Installing More Than One Frontline Hob
Installing more than one Frontline hob Installing more than one Frontline hob Additional parts: cross bar(s), heat resistant silicon, rubber block, shaving blade. Only use special heat-resistant silicon. Cut-out section Distance from the wall: at least 50 mm Depth:490 mm Width: The widths of all appliances to be built-in are added together, minus 20 mm (see also “Overview of all appliance widths”) Example:... - Page 16 Installing more than one Frontline hob 6. Put silicon on the appliance corners that will touch one another. Put silicon on the end of the cross bar. 7. Loosely screw in fixing plates / retaining grips from below on the worktop and on the connecting cross bar.
- Page 17 Installing more than one Frontline hob 10. Inject a line of silicon into the gap between the appliances. 11. Dampen silicon line with a little soapy water. 12. Press rubber block hard against the glass ceramic and draw it slowly along the gap. 13.
-
Page 18: Rating Plate
Rating Plate 941 177 540 AEG-ELECTROLUX 0,31 kW 230 - 240 V 50 Hz FM2500DD-A FDD 180... -
Page 19: Service And Spare Parts
Service and Spare Parts Service and Spare Parts In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. - Page 20 www.aeg-electrolux.co.uk...