Adjusting The Cutting Height; Cutting System Maintenance; Caring For Your Lawnmower - Electrolux Flymo Micro Lite Manual

K1 - Highest height of cut - This symbol visible
after fitting.
K2 - Lowest height of cut - This symbol visible
after fitting.
• THERE ARE 2 CUTTING HEIGHTS
• Height of cut is adjusted by turning over the
cutting head.
•
To Remove the Cutting Head and Fan (L)
N1 - plastic cutters, N2 - cutting head, N3 - fan,
N4 - hood
• Always handle the plastic cutters with care -
sharp edges could cause injury. USE GLOVES.
Checking your Cutting System(N)
•
•
Replacing Plastic cutters
•
It is very important that you keep your lawnmower
clean. Grass clippings left in any of the air intakes or
under the hood could become a potential fire hazard.
Never carry a lawnmower when it is running.
Cleaning (R)
Cutting Height
IMPORTANT!
• Never use water for cleaning your lawnmower.
ENGLISH - 3
HOW TO MOW
(J)

ADJUSTING THE CUTTING HEIGHT

CUTTING SYSTEM MAINTENANCE

CARING FOR YOUR LAWNMOWER

see Adjusting the
Do Not Overload Your Mower.
To Refit the Fan and the Cutting Head (M)
IMPORTANT
ENSURE FAN AND CUTTING HEAD ARE
CORRECTLY LOCATED
•
•
• Never fit a steel bar blade to this product.
To Replace Plastic Cutters (P, Q)
•
(P)
• IMPORTANT
ENSURE PLASTIC CUTTERS ARE
CORRECTLY LOCATED.
• Do not clean with chemical, including petrol, or
solvents - some can destroy critical plastic parts.
At the End of the Mowing Season
Carrying your Lawnmower (S)
Storing your Lawnmower (T)
(Q)