Advertisement
Quick Links
1. Description of the product
LS701 laser detector is an indispensable accessory of rotating laser instrument. The two must be used
together. This detector not only can detect the position of the laser signals transmitted by the rotating laser
instrument, but also provide the horizontal references quickly and precisely.
This product is characterized by high sensitivity, single-faced LED display, low power consumption, good
reliability and easy manipulation. It can be used with different types of rotating laser.
2. Components
1. Cord-hanging hole
2. Signal indicator
3. Buzzer
4. Long vial
5. Detecting window
After power on, the middle signal indicator turns green first and then turns red. After the
buzzer gives short reminding sound for two times, the unit will power off automatically. In
this case, it means that the battery voltage is seriously low and it is necessary to replace
the battery immediately to keep on using.
After power on, the down signal indicator flashes, which means that the battery is at low
voltage, and it is necessary to replace the battery in time.
Power key: turn on/off the instrument
3. Battery installation
Open the battery cover-board and put the battery into the battery case according to the polarity shown in
(1)
the battery slot.
Snap the battery cover-board back, and push it to the end along the two grooves.
(2)
LS701 Laser detector Instruction Manual
6. Reference rabbet
7. Power key
8. Zero-position indication line
9. Connecting nut
10. Battery door
Advertisement
Summary of Contents for LAISAI LS701
- Page 1 LS701 Laser detector Instruction Manual 1. Description of the product LS701 laser detector is an indispensable accessory of rotating laser instrument. The two must be used together. This detector not only can detect the position of the laser signals transmitted by the rotating laser instrument, but also provide the horizontal references quickly and precisely.
- Page 2 Note： (1) Take the battery out when the unit is not in use for a long time. (2) When displaying low battery, change the battery as soon 4. Detecting methods (1) This unit can detect the red laser beam with a wavelength of 600nm～780nm. (2) Set the rotating laser to the scanning state.
- Page 3 5. When the instrument cannot receive the laser signal for 6 minutes, and there is no any operation during these 6 minutes, the middle signal indicator will turn green first and then turn red. Meanwhile, after the buzzer gives short reminding sound for two times, the unit will power off automatically. 5.
- Page 4 gently. (3) Avoid knocking, and falling on the ground. (4) This instrument doesn’t have the function of rainproof, so you should protect the unit from moisture and avoid the unit sprayed by the water. (5) Strictly prohibit throwing the instrument in the fire. 7.