Advertisement
2. If your ADSL connection is not detected or your actual connection is not as detected one,
please click Manual Setting.
a)
Select your Country and ISP and click Next. If your country and ISP are not on the
list, select Not List, key in your VPI and VCI values. Most of ISPs use encapsulation
mode "LLC", click Next. In this case, you can refer to the table below or contact your
ISP for VPI/VCI values.
ISP
VPI/VCI
Bigpond
8/35
Optus
8/35
AAPT
8/35
iiNet
8/35
iPrimus
8/35
TPG
8/35
OzEmail
8/35
Internode
8/35
Dodo
8/35
iHug
8/35
Pacific
8/35
Internet
Xtra - New
0/100
Zealand
Connection Type
Encapsulation Mode
PPPoE
LLC
PPPoE
LLC
PPPoE
LLC
PPPoE
LLC
PPPoE
LLC
PPPoE
LLC
IPoA
LLC
PPPoE
LLC
PPPoA
VC/MUX
PPPoE
LLC
PPPoA
VC/MUX
IPoA
LLC
PPPoE
LLC
PPPoE
LLC
PPPoE
LLC
PPPoA
VC/MUX
PPPoA
VC/MUX
Rev1.0
Username format example
username@bigpond
username@bigpond.com
username@bigpond.net.au
username@direct.telstra.net
username@optusnet.net.au
username@aapt.net.au
Enter username and your
password.
Enter username and your
password.
Enter IP address, Subnet Mask,
Gateway and DNS as instructed
by TPG.
Enter username and your
password.
Enter your username and your
password.
Enter IP address, Subnet Mask,
Gateway and DNS as instructed
by Internode.
user@dodo.com.au
Enter username and your
password.
username@dsl.pacific.net.au
username@dsl.pacific.net.au
Advertisement
