Programming In The Nck Memory Area - Siemens SINUMERIK 840C Operator's Manual

01.99
6.3

Programming in the NCK memory area

i
6-46
Fig. 6-30 Basic display: Edit NC
In the Programming/Edit NC area you can
• Edit part programs in DIN format directly in the processing memory, i.e.
the part programs edited here must be saved to the hard disk if they are to
be retained in the control after switching it off.
• Display overviews of main programs, subroutines and MDA programs in
the part program memory of the NCK.
If the letter "i" is displayed in the softkey window on the right-hand side, notes
relating the selected area appear after pressing the HELP key.
Important
The part programs edited here must be backed up on the hard disk as they are
lost when the control is switched off.
6FC5198-6AA60-0BP1 © Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
6 Programming