5 Getting started
After connecting the necessary cords, lastly plug in the power cord.
This section describes the steps up to turning on the power.
5.1 Hooking up the connection cable
Connection cable
Warning
5.2 Connecting the LED
Connecting the head
14
Remove the caps on the connection-cable terminals, and hook up
the cables.
Plug the female side of the connection cable into the main unit.
Plugging in the wrong side (the male connector) could bend the
connector pins or cause other issues.
LED head
Lens protector cap
Connection cable
Main unit side
Connector
Connector
LED side
Connector