8 Product
information
Note
•
Product information is subject to change without prior
notice.
General information
Power Supply
(through USB socket)
Built-in Battery
Dimensions - Main Unit
(W x H x D)
Weight - Main Unit
Bluetooth
Bluetooth specification V2.1+EDR
Supported profiles
Range
Amplifier
Rated Output Power
Signal to Noise Ratio
AUX Input
9
EN
5V, 0.6A
Lithium battery
107 x 73 x 53 mm
0.125 kg
HFP v1.6, A2DP v1.2,
HSP v1.2
10 m (Free space)
1.2 W RMS
> 62 dBA
600 mV RMS, 22 kOhm
9 Troubleshooting
Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/support). When you contact
Philips, make sure that the device is nearby
and the model number and serial number are
available.
General
No power
•
Recharge your speaker.
No sound
•
Adjust volume on this product.
•
Adjust volume on the connected device.
•
When you listen to audio through
Bluetooth, make sure that no audio input
cable is connected to the AUX socket.
•
Make sure that your Bluetooth device is
within the effective operational range.
No response from the speaker
•
Restart the speaker.