Listening to Radio
Using buttons on the Remote Control
1. Press the FUNCTION button to select FM or
AM band.
2. Tune in to the desired station.
• Preset Tuning : Press the STOP button to
select PRESET and then press TUNING (
buttons to select the preset station.
• Automatic Tuning : Press the STOP button to
select MANUAL and then press and hold the
TUNING (
) button to automatically search
for active broadcasting stations.
• Manual Tuning : Press the STOP button to
select MANUAL and then briefly press the
TUNING (
) button to increase or decrease
the frequency.
Using buttons on the product
1. Press the TUNER/AUX button to select FM or
AM band.
2. Select a broadcast station.
• Preset Tuning : Press the STOP ( @ ) button to
select PRESET and then press the
[ ] buttons to select the preset station.
• Automatic Tuning : Press the STOP ( @ )
button to select MANUAL and then press and
hold the [ ] buttons to automatically
search the band.
• Manual Tuning : Press the STOP ( @ ) button
to select MANUAL and then press the [ ]
buttons to tune in to a lower or higher
frequency.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the
sound switches between STEREO and
MONO.
• In a poor reception area, select MONO
for a clear, interference-free broadcast.
✎
NOTE
`
This applies only when listening to an FM
station.
`
This product may not support the AM function
depending on your region.
Presetting Stations
)
Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM or
AM band.
2. Press the STOP ( @ ) button to select <MANUAL>
mode.
3. Press the TUNING (
<89.10>.
4. Press the ENTER button.
• Number flashes on the display.
5. Press the TUNING (
number.
• You can select between 1 and 15 presets.
6. Press the ENTER button again.
• Press the ENTER button before number
disappears from the display.
• Number disappears from the display and the
station is stored in memory.
7. To preset another station, repeat steps 2 to 6.
• To tune in to a preset station, press the
TUNING (
✎
NOTE
`
You can also use the [, ] buttons on the
front panel instead of the TUNING (
in step 3,5,7.
) buttons to select
) buttons to select preset
) to select a channel.
) buttons
English
27