What To Do If - Electrolux 38TCIO User Manual

What to do if ...

Problem
The cooking zone cannot be
switched on or is not operating
The residual heat indicator is
not displaying anything
Power function cannot be
switched on
f
lights up
e
and number are displayed
It is very hard to adjust the heat
settings
Possible cause
More than 10 seconds have
passed since the appliance
was switched on
The child safety device is
l
switched on
Several sensor fields were
touched at the same time
Safety cut-out has been trig-
gered
The cooking zone was only on
for a short time and is therefore
not hot
The Power function function
has already been activated
several times quickly one after
the other
Unsuitable cookware
No cookware on the cooking
zone
Electronics fault
Potential differences
what to do if ... electrolux 21
Remedy
Switch the appliance on again.
Deactivate child safety device
(See the section "Child safety
device")
Only touch one sensor field
Remove any objects (pan,
cloths, etc.) that are lying on
the control panel. Switch ap-
pliance on again
If the cooking zone is sup-
posed to be hot, call the Cus-
tomer Service Department.
Let cooking surface cool
down.
Use suitable cookware
Put cookware on zone
Disconnect the appliance from
the electrical supply for a few
minutes (Take the fuse out of
the house's wiring system)
If after switching on again,
is displayed again, call the
customer service department
Do not touch the pan handle
when setting the heat settings
and do not position over the
control panel.
e