Service And Maintenance; Fuse; Changing The Fuse - AEG DB 70 Instructions For Use Manual

GB
15
please note that in the case of some vehicles, the 12 v vehicle socket may only
function when the ignition is turned on.
only use the double plug socket for short periods of time when the vehicle's
engine is not running. otherwise the vehicle's battery will run down.
Always remove the vehicle plug from the 12 v vehicle socket after use. when
doing so, always pull on the vehicle plug and not on the connector cable.

sERvIcE AnD MAIntEnAncE

Fuse

the device is protected with a fuse in the vehicle plug. It is designed to break
the circuit in the event of a short circuit or voltage peaks and must be replaced
afterwards.

changing the fuse:

2 3 4
1
Warning! Do not install a more powerful fuse. this could cause damage to
the electronic system.
1. Unscrew the retainer ring (1) with the fuse cover (2) from the vehicle plug
(4).
2. Insert a new fine wire fuse (3) of the same size (see technical specifica-
tions).
3. screw the retainer ring (1) with the fuse cover (2) back onto the vehicle
plug (4).