Switching On The Device; Connect To Other Devices; Lcd Monitor - Change Display Settings - AEG DVD 4555 LCD Instruction Manual

Side Panel Inputs
Connect Other Playback Devices
Connect TV Set
DVD4555LCD_IM
USB Port (Fig. 1/14)
Plug a USB storage device directly into the correct port of the device.
NOTE:
■
The USB port is not designed for charging external devices.
■
The USB port is only intended for playing media files from commercially
available USB sticks.
Switching on the Device (Fig. 1/15; Fig. 2/5)
Turn the device on by sliding the "ON/OFF" main switch on the side of the
device to "ON". The power-on indicators
NOTE:
In Dual mode, the DVD MONITOR must be switched on so that the power
supply is fed to the second monitor.

Connect to Other Devices

■
Connect an AV cable to the AV IN socket (Fig. 2/3) and to the playback
device to view images of another playback device (such as digital camera).
NOTE:
Other devices can only be connected to the LCD Monitor (slave monitor).
Connect an A/V cable to AV OUT (Fig. 1/11) and to the TV set to view images on
the TV set.
Switch the TV set to AV IN. Observe the TV' s user manual.
NOTE:
You need an audio cable with a 4-pin 3.5 mm jack plug to cinch socket, with a
pin length of 15 mm.

LCD Monitor - Change Display Settings

■
Press the MODE button (Fig. 2/8), to display the Setup menu.
■
Use the and buttons (Fig. 2/9) to select the option. Use the VOL– and
VOL+ buttons (Fig. 2/7) to change the setting.
NOTE:
The menu hides itself automatically after a short time if no setting has been
changed.
Picture
In the "Picture" menu, you can adjust brightness, contrast, colour, OSD language
and the aspect ratio (ZOOM).
By selecting the menu item "RESET" you can reset the settings to the factory
settings.
English
(Fig. 1/8, Fig. 2/11) light up red.
23.01.17
39