Advertisement
Battery Replacement
When the system indicates that the sensor has a low bat-
tery, remove the old battery and install a new battery (Dura-
cell DL123A or a Sanyo CR123A) into the battery holder,
observing proper polarity.
Caution!
Replace only with a Duracell DL123A battery or a Sanyo
CR123A battery. Observe polarity when installing a new
battery. Installing the battery backwards may cause damage
to the sensor.
Dispose of used batteries according to the manufacturer's
instructions and/or local government authorities.
Specifications
Model No.: 60-975-95R and 60-975-11-95R
RF Frequency: 319.5 MHz
Compatibility: All GE Interlogix 319.5 MHz Control Panels and
Receivers
Battery Type: 3.0 VDC Lithium
Recommended Battery: GE CR123A
Typical Standby Current (µA): 10
Estimated Battery Life: 5 years (one battery); 10 years (two
batteries)
Typical RF Power Output (mW): 10
Operating Temperature Range (C°): 0 to 49
Storage Temperature Range (C°): -34 to 60
Relative Humidity: 0 - 90% non-condensing
Dimensions (mm): 45 x 115 x 31 (L x W x D)
Weight: 88
)
‹ "ÃB@ÃD‡r…y‚tv‘ÃTv€‚Ãv†ÃhÃ…rtv†‡r…rqÇ…hqr€h…xÂsÃB@ÃD‡r…y‚tv‘Ã
6yy‡ur…Ç…hqr€h…x†Ãh…rÃ…‚ƒr…‡vr†Ã‚sÇurv…Âr…†
6yyÃ…vtu‡†Ã…r†r…‰rq
PRELIMINARY 10/1/03
4
@ÃD‡r…y‚tv‘
%%ÃTrp‚qÃT‡…rr‡ÃI‚…‡uÃ
I‚…‡uÃThv‡ÃQhˆyÃHIÃ$$ (Ã
UrpuvphyÃTˆƒƒ‚…‡)Ã'&&& % #
Advertisement
