Programming Tax - Samsung ER-550 Operator's And Programming Manual

Programming Tax

Most sales taxes can be programmed by entering an add-on tax rate percentage. You will find
instructions for programming an add-on tax rate percentage here. In some cases you can find that tax
that is entered as a percentage does not follow exactly the tax chart that applies in your area. If this
is the case, you must enter your tax using tax table programming. This method will match tax
collection exactly to the break points of your tax table. See "Programming a Tax Table" on page 95.
Important Note: After you have entered your tax program, test for accuracy
by entering several transactions of different dollar amounts. Carefully check
to make sure the tax charged by the cash register matches the tax amounts on
the printed tax chart for your area. As a merchant, you are responsible for
accurate tax collection. If the cash register is not calculating tax accurately, or
if you cannot program your tax properly from the information in this manual,
contact your Samsung Dealer for assistance.
Programming an Add-On Tax Rate Percentage
1. Turn the control lock to the PROGRAM position.
2. From the PROGRAM MODE menu, press 2 to view the TAX PROG. screen.
3. When the arrow is pointed at the TAX NUMBER field, enter the number of the tax you wish to
program. (There are four taxes available, enter 1, 2, 3, or 4.) The arrow will move to the TAX
TYPE field.
24  Getting Started
TAX PROG.
TAX NUMBER (1-4)
TAX TYPE (0-2)
0 : ADD-ON
1 : TAX TABLE
2 : VAT
1 
0
Samsung ER-550 Electronic Cash Register