Voice Commands Summary - Epson Moverio Pro BT-2000 Developer's Manual

5.2. Voice commands summary

The BT-2000 voice command will select the voice information file(lms file), and recognizes the
voice included in this information, and returns the corresponding ID. Voice is inputted using a
microphone, and the device recognizes the voice that has been registered*.
By mounting a process in the application for each ID acquired by callback, voice input can be used
as a trigger.
* Only vocabulary that is included in the voice information file can be recognized, this differs from
the standard sound recognition software that uses network access to confirm words.
MOVERIO Pro Developer's Guide (Rev.1.4)
43