Something Wrong - Smeg SDO10 Instructions For Installation And Use Manual

Smeg oven instructions for installation and use
Table of Contents

Advertisement

12. SOMETHING WRONG?

PROBLEM
The oven doesn't work
The results of cooking are
unsatisfactory
The oven smokes
Steam and condensation settle
on the food and the oven cavity
The timer keeps flashing
The timer does not work
Instructions for the user
POSSIBLE CAUSES
-
The oven is not wired in or
switche on at the wall.
-
There is a power failure
-
An
automatica
program has been set
-
Insufficient pre-heating
-
Temperature is too high or
too low
-
Wrong shelf position
-
Wrong type of dish
-
Temperature
is
set
-
Cooking time is incorrect
-
Cooking function selector is
wrongly positioned
-
The shelf or oven dish are
not in the centre of the oven
-
The oven is dirty
-
Food has spilled over
-
Food
(meat)
is
excessively
-
The dish has been left inside
the oven too long
-
There has been a power
failure
-
Incorrect setting
WHAT TO DO?
-
Switch on at the wall
-
Check power suplly
-
cooking
Set the programmer back to
the off position
-
Counsult cooking guides
incorrectly
-
Centre the shelf or oven dish
in the oven
-
Clean the oven once cooking
is finished. Let it cool first.
-
Use a larger dish
-
spitting
Reduce temperature setting
-
Leave dishes inside the oven
no longer than 15 – 20
minutes after the cooking is
completed
-
Reset the clock
-
Check the instruction for
timer
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdo10-6Sdo12Sdo14

Table of Contents