STANDARD KIT PARTS
Battery Tray Kit (CXS type)
1.
Unscrew the four 6
panel.
2.
Route the starter cable under the tank and connect it to the starter
solenoid.
3.
Connect the ground cable to the generator.
4.
Pass the starter cable and the ground cable through the slots on the
side panel.
5.
Reinstall the side panel using the four 6
STARTER SOLENOID
SIDE PANEL
SLOT
STARTER CABLE
INSTALLATION OF KIT PARTS
12.
×
10 mm flange bolts, and remove the side
STARTER CABLE
(positive)
6
GROUND CABLE
×
10 mm flange bolts.
×
10 mm FLANGE BOLT (4)
CABLE TIE
GROUND
CABLE
57