Smeg S20XMF Instruction Manual page 10

3.2.6 Switching off the alarm
The alarm switches off automatically after seven minutes. It can be
manually turned off by pressing key
3.2.7 Minute-counter
The programmer can also be used as a simple minute counter.
The use of the minute-counter will not interrupt oven operation at the end
of the set time.
By pressing key
at the same time press keys
programmed count starts and the symbols
monitor.
After programming the minute-counter, the display will show the right
time. to display remaining time, press key
Wrong settings are prevented logically (e.g., any conflict between end of
cooking time and a longer time will not be accepted by the programmer).
3.2.8 Cancellation of set data
Once the programme has been set, keep the key of the function to be
cancelled pressed, while at the same time
of variation keys
cooking time by the programmer.
3.2.9 Changing the set data
The cooking data entered can be changed at any time by keeping the
function key pressed and at the same time adjusting the keys
34
Instructions for the user
, the display shows
or Time cancellation will be considered as end-of-
.
; keep the key pressed and
or By releasing the key
and
.
is reached by means
, the
appear on the
or
.