Table of Contents
Advertisement
3.
Configuration for MH210
The following two methods are available for the configuration of MH210.
(1)
Settings from MH210
(2)
Settings from Web browser
3.1
Settings from MH210
By starting MH210 in the system setting mode, the configuration data can be registered, displayed,
and modified.
Procedure for starting MH210 in the system setting mode
(1)
"Power off" state
(2)
Simultaneously press [4]+[9]+[遧] to power on MH210.
"System Setting" displays.
(3)
Press [FNC].
Menu items display.
* MH210 remains in the system setting mode until power-off.
Items that can be selected from the system setting menu are as follows:
[1]
Information -- Verification of settings
[2]
Net setting -- Registration and modification of network parameters
[3]
SIP setting -- Registration and modification of SIP parameters
[4]
WLAN setting -- Registration and modification of WLAN parameters
* Be sure to perform [2] to [4] at the initial start-up of MH210.
ⅴ渧橳
寬
ⅸ A 淏寘
[1]Information
[2]Net setting
[3]SIP setting
---------------------------
Back
Select
- 3 -
ND-91822 (E)
Issue 1.0
Advertisement
Table of Contents
