Image Stabilizer Mode Selector Switch - Canon EF600mm f/4L IS III USM Instructions Manual

9. Image Stabilizer
Image stabilization corrects vibrations that occurs with hand-held shots.
Image stabilizer switch
Set the STABILIZER switch
to ON.
If you are not going to use
O O
image stabilization, set the
image stabilizer switch to OFF.
Image Stabilizer modes
MODE 1: Corrects vibrations in all directions. It is suited to shooting still subjects.
O O
MODE 2: When you take a panning shot either horizontally or vertically, corrects vibrations at
O O
right angles to the direction of panning. It is suited to shooting moving subjects.
MODE 3: During exposure, corrects vibrations in the same way as MODE 2.
O O
Since vibration is corrected only during exposure, It is suited to shooting irregularly
moving subjects.

Image stabilizer mode selector switch

Select an Image Stabilizer
mode according to the
application and shooting
conditions.
Camera shutter button
Press the shutter button down
halfway. Once you have a
stable image, press down all
the way to take the picture.*
* Only MODE 3 does not
allow you to check the effect
gained from stabilization.
ENG-16