Table Of Contents - Panasonic DMP-UB400 Basic Operating Instructions Manual
Ultrahd
Hide thumbs
Also See for DMP-UB400:
- Owner's manual (46 pages) ,
- Basic operating instructions manual (12 pages) ,
- Operating instructions manual (44 pages)
Table of Contents
Advertisement
Available languages
Available languages
∫ Front
1
Disc tray
2
USB port (
DC 5 V 500 mA)
This port supports USB2.0 High Speed.
3
Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
CAUTION
Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and
this may cause malfunction.
≥ When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.
≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the connected equipment.
∫ Rear
1
1
AC IN (
) terminal
2
3
4
5
1
2
3
5
2
3
4
When the unit is turned on, the LED flashes
first, and then lights up.
If the LED keeps flashing, there may be an
error.
5
Open or close the disc tray
6
Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
4
6
7
6
7
USB port (HDD) (
This port supports USB3.0 Super-Speed.
8
(OPTICAL terminal)
Class II equipment (The construction of the product is
double-insulated.)
6
[UB400]
Pull to flip down
the front panel.
[UB310] [UB300]
There is no front
panel.
4
[UB310] [UB300]
8
DC 5 V 900 mA)
TQBS0043
(5)
5
5
Hide quick links:
Advertisement
Table of Contents
