Installation Of Usb Driver; Uninstallation Of Old Usb Driver - Panasonic HL-C2 Series User Manual

1-2

Installation of USB Driver

USB driver should be installed to control the HL-C2 by external control
device (USB host).
For a PC that has the old USB driver installed already
procedures in "1-2-1 Uninstallation of Old USB Driver" and then install
the new USB driver.
For installation for the first time
Installation of USB Driver" and install the driver.
Old USB driver is referring to drivers " FTDI USB Serial Converter Drivers"
* This explanation is based on using a PC with Windows XP as the external
control device.
The procedures vary depending on the OS you are using.

1-2-1 Uninstallation of old USB Driver

Uninstall following the below procedures.
1
Open Control Panel from My Computer.
Follow the procedures in "1-2-2
1-3
Chapter 1 Prior to Use
Follow the
1