Functions - Breville Smart Tea Infuser Instruction Book

Functions

BEFORE FIRST USE
In order to remove any dust or protective
residues from the manufacturing process, it
is recommended to run a boiling cycle then
discard the water.
1. Remove and safely discard any packing
material, promotional labels and tape from
the Breville Smart Tea Infuser™.
2. Lift the inner lid along with attached tea
basket.
Then remove the outer lid. Wash the outer
lid, tea basket, and inner lid in warm soapy
water with a soft sponge, rinse and dry
thoroughly.
WARNING
Never immerse the base of the glass jug,
the power base, power cord or power plug in
water or allow moisture to come in contact
with these parts.
3. Place the power base on a flat, dry surface.
4. Unwind the power cord completely and
insert the power plug into a grounded wall
outlet.
WARNING
Never fill the glass jug with chilled water.
Allow the Breville Smart Tea Infuser™ to
cool before refilling.
WARNING
Filling past the MAX line may result in
serious burns or injuries as a result of
overflowing hot or boiling water. Filling
below the MIN line will result in the Breville
Smart Tea Infuser™ switching off before the
water has boiled or reached the selected
temperature.
5. Detach the tea basket from the inner lid by
pressing the button.
6. Without the tea basket in place, fill the glass
jug to the water MAX mark and place on
the power base. Securely fit the lids onto the
glass jug.
7. The Breville Smart Tea Infuser™ will beep
and the buttons will illuminate.
8. Select '212°F' in the temperature indicator
by pressing TEMP button and turn off the
timer by pressing STEEP TIME button
several times. Then press START/STOP
button to start.
9. Once the water reaches 212°F, it will beep
3 times.
10. Discard the water. The Breville Smart Tea
Infuser™ is now ready to use.
9