Rs-232C Connector Kit - NEC Express5800 Series User Manual

Chapter 2 Preparations

1.11.5 RS-232C Connector Kit

Install the RS-232C Connector Kit to a PCI slot in the following procedure.
1. See steps 1 to 5 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Use the RS-232C cable (B) and PCI bracket (2) that comes with RS-232C Connector Kit
PCI BRACKET (2)
3. Remove the screws attached to the RS-232C cable (B) and connect the RS-232C cable (B) to the PCI
bracket (2) by using the removed screws.
4. Remove the COM slot cover referring to Chapter 2 (1.11.3 Installing PCI card).
5. Check that the end of the bracket is correctly inserted in the frame guide, and then return the lock lever to
its original position to firmly lock the bracket.
6. Attach the connector on the other end of the cable to the connector for attaching an extra RS-232C cable
connector on the motherboard.
7. After attaching the connector, confirm the following BIOS settings.
Advanced - Serial Port Configuration - Serial Port B - Enabled
Express5800/T120g User's Guide
1. Installing Internal Optional Devices
RS-232C cable (B)
87