NEC Express5800 Maintenance Manual page 66

Chapter 2 Convenient Features
(a) Processor Information submenu
For details about the options, see the table below (display only).
Option
Processor 1-4 CPUID
Processor Type
Processor Speed
Active Cores
Max Cores
L2 Cache RAM
L3 Cache RAM
Microcode Revision
EMT64
Hyper-Threading
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
66
Parameter
Number Shows ID of Processors 1 to 4 by a numerical value.
Not Installed Not Installed shows that no processor is installed.
–
Shows type of Processors 1 to 4.
–
Shows clock speed of Processors 1 to 4.
–
Shows the number of active cores in Processors 1 to 4.
–
Shows the maximum number of cores in Processors 1 to 4.
–
Shows the secondary cache size of Processors 1 to 4.
–
Shows the tertiary cache size of Processors 1 to 4.
–
Shows the revision of the microcode applied to Processors
1 to 4.
Supported Shows whether the Intel 64 architecture is supported on
Not Supported Processors 1 to 4 or not.
Supported Shows whether the Hyper-Threading Technology is
Not Supported supported or not on Processors 1 to 4.
Descriptions
[ ]: Factory settings
1. System BIOS