Nosmell Active Charcoal Filters; Resetting The Charcoal Filter Operating Hours Counter; Disposing Of The Charcoal Filters - Miele DA 2668 Operating And Installation Instructions

NoSmell active charcoal filters

With recirculation mode, two charcoal
filters must be fitted in addition to the
grease filters. These are designed to
absorb cooking odours.
The charcoal filters are fitted in the
canopy above the grease filters.
Charcoal filters are available to order via
the Miele online shop (see the end of
this booklet for contact details) or
directly from Miele. The part number of
the charcoal filter required is listed
under "Technical data".
Fitting and replacing the charcoal
filters
 Before fitting or replacing the
charcoal filters, the panel and the
grease filters must first be taken out
(see previous section for instructions
on how to do this).
 Unwrap the charcoal filters.
 Press the charcoal filters into the
frame.
 Refit the grease filters.
Cleaning and care
When to change the NoSmell active
charcoal filters
 Replace the charcoal filters when
they no longer absorb kitchen odours
effectively.
They should be replaced at least
every 6 months.
The operating hours counter will remind
you to replace the charcoal filters by
lighting up the charcoal filter symbol .
Resetting the charcoal filter
operating hours counter
After changing the charcoal filters, the
operating hours counter needs to be re-
set.
 To do this, with the fan switched on,
press the operating hours control
 twice, then press it again and
hold it for approx. 3 seconds until
only 1 is flashing.
The charcoal filter symbol  goes out.
If you want to replace the charcoal
filters before the operating hours
counter has reached its maximum:
 Press the operating hours control
 twice and hold it for approx. 6
seconds until only 1 is flashing.

Disposing of the charcoal filters

 Used charcoal filters can be disposed
of with the normal household waste.
41