Dsp Type List - Yamaha SHS-500 Reference Manual

Effect List

DSP Type List

DSP Type
Distortion 1
Distortion 2
DSP Chorus
Flanger
Phaser
Tremolo
Rotary Speaker
Low Pass Filter
High Pass Filter
Display
Dist.1
Adds an "edgy" distortion to the sound. For powerful guitar
sound of Rock and Blues, it is an indispensable effect.
There are two different types (Distortion 1 and 2). Turn the
Dist.2
Knob to adjust the degree of the distortion effect.
DSP Chrs
Adds warm modulation to the sound. Turn the Knob to
change the modulation speed.
Flanger
Creates a swirling, metallic sound similar to that of a jet
airplane. Turn the Knob to change the modulation speed.
Phaser
Cyclically modulates the phase to add modulation to the
sound. Turn the Knob to adjust the modulation speed.
Tremolo
Rich Tremolo effect with volume modulation. Turn the
Knob to adjust the modulation speed.
RotarySp
Simulates the characteristic effect of a rotary speaker.
Turn the Knob to change the rotating speed.
LPF
Modifies the tonal color of the sound by cutting the signals
above the Cutoff Frequency. Turn the Knob to adjust the
cutoff frequency.
HPF
Modifies the tonal color of the sound by cutting the signals
below the Cutoff Frequency. Turn the Knob to adjust the
cutoff frequency.
Description
26