Table of Contents
Advertisement
Operation
Warning!
The motor switches itself off as soon as the mixing
e
jug
is removed from the motor block
then be overlooked that the appliance is still swit-
ched on. The motor will thus start of its own accord
as soon as the mixing jug
Therefore:
• First insert the power plug into the wall socket
when the mixer jug
its lid fitted and closed.
• Before mounting the mixing jug always check to
see that the appliance is switched off or that the
power plug has been removed.
• Before removing the mixer jug
pliance off, remove the power plug and wait for
the motor to stop revolving.
Filling and mounting the mixer jug
³
ake the mixer attachment
u
and remove the lid
³
Fill the mixer attachment
w
lid
firmly back onto the mixer attachment
Ensure that the pourer nose on the mixer attach-
e
ment
is also closed.
³
Insert the filling cap
secure it by turning it clockwise.
³
Place the ready filled and sealed mixer jug
onto the motor block
e
jug
until you can press it down. The motor
can start only when the mixer jug
positioned.
u
. It could
e
is replaced on it:
e
is filled and mounted with
e
, switch the ap-
e
from the motor unit
w
.
e
and then press the
q
into the lid opening and
u
. Lightly turn the mixer
e
is securely
Selecting operating speeds
When the mixer jug
and securely fitted to the motor block
then switch the appliance on.
³
Place the switch
– Level 1-3
for fluid or soft foodstuffs, for mixing, blending
and stirring
– Level 3-5
for firmer foodstuffs or for hacking
– Level Ice Crush/Clean
for short, powerful impulse operation, e.g. for
crushing icecubes or when cleaning. So as not
to overburden the motor, the switch
engage in this position. Hence, hold the switch
t
in this position for short periods only.
Notice
Fill the mixer attachment
180 g of ice cubes. If filled with more than this, the
appliance cannot optimally crush them.
Filling when in use
Warning!
e
.
Should you wish to insert further foodstuffs during
operation, you may ONLY open the filling cap
provided for this purpose.
• Under no circumstance should you open the lid
e
w
. Pieces of the foodstuff could be thrown out at
high speeds!
• Do not insert cutlery items or mixing tools into
the mixing jug
There is a considerable risk of injury should these
make contact with the swiftly rotating cutters
To insert something when the appliance is in
operation, ...
³
turn the filling cap
ve it.
³
Afterwards, replace the filling cap
lid and secure it by turning it clockwise.
- 4 -
e
is filled, completely sealed
u
t
on ...
t
e
with a maximum of
e
when the appliance is in use.
q
anti-clockwise and remo-
, you can
does not
q
r
!
q
into the
Advertisement
Table of Contents
