Functions - Breville Juice Fountain Duo Instruction Book

Functions

WITH THE JUICE NUTRI DISC™ OR
PUREE DISC
1. Wash your selection of fruit and/or
vegetables to prepare them for juicing.
WARNING
Do not put hard fruit and vegetables
(ie. carrots, apples , fresh beetroot , etc.) or
ice through juicer when using puree disc.
This could damage parts of the unit.
2. Ensure the juicer is correctly assembled –
see assembling instructions. Ensure the
Nutri Disc™ or puree disc is thoroughly
cleaned before each use. Ensure you place
the Juice Jug (or glass) under spout before
commencing juicing.
3. Plug the power cord into a 110/120V
power outlet. The light surrounding the
START | STOP button will illuminate.
4. Use the speed selector table as a guide for
juicing different fruit and vegetables. Push
the START | STOP button and the Juicer
will automatically start.
5. With the motor running, place food into the
feed chute using the food pusher, gently
guide food down the feed chute.
Do not exert excess pressure. To extract the
maximum amount of juice, always push the
food pusher down slowly.
6. As fruits and vegetables are processed juice
will flow into the juice jug and the separated
pulp will accumulate in the pulp container.
The pulp container can be emptied during
juicing by turning the juicer OFF at the
control panel and then carefully removing
the pulp container. Replace the empty pulp
container into position before continuing
to juice.
12
NOTE
• The light will be illuminated for 2 minutes
before fading into sleep mode. The light
will come back on by activating any of the
controls.
• Do not allow the pulp container to over fill as
this may affect the operation of the appliance.
• To minimize cleaning, line the pulp container
with a produce bag to collect the pulp.
Pulp can be used in other dishes, or as a
compost for the garden or discarded.
USING THE PUREE DISC
When using the puree disc, puree will flow into
the juice jug. There will be no pulp extracted
into pulp container.
SELF-RESET OVERHEATING
PROTECTION
The Breville juicer also fitted with a self-
resetting safety device which safeguards
against overheating on the motor with
excessive loads. If overheating occurs,
the juicer will automatically activate the
overheating protection device and the motor
will turn itself off. If this occurs, the light
surrounding the START | STOP button will
flash red. When the overheating protection is
activated, unplug the juicer from power outlet
for at least 15 minutes to allow the unit to cool.
Then plug juicer into the power outlet and use
as normal.