Using The Voice Services Of Your Phone; Using Voice-Activated Dialing; Programming Voice Dial Tag To Your Phone - Sanyo SCP-7200 Operating Manual

Using the Voice Service of your P hone

Using Voice-Activated Dialing

In addition to PCS Voice Command, you can use Voice Dial tag to automatically dial a
phone number in your Internal Phone Book. Your phone can store up to 30 Voice Dial
tags. (To create a Voice Dial tag, see "Programming Voice Dial Tag to Your Phone" on
page 65.)
To use a Voice Dial tag to call a phone number:
1. From the Standby mode, press TALK or SPEAKER shortly.
2. Follow the voice prompts and recite the entry's Voice Dial tag into your phone's
microphone.
Note: Record Voice Dial tags in a quiet environment and without the aid of an accessory
(for example, a headset or hands-free car kit).

Programming Voice Dial Tag to Your Phone

To program a voice dial tag:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight VoiceService, and press Menu/OK.
3. Highlight Voice Dial, and press Menu/OK.
4. Highlight Program , and press Menu/OK.
5. The phone will prompt you to say the name you want to program. Wait for the beep
and then say the name.
6. Respond to the prompt by repeating the name after the beep.
7. Enter or highlight the entry (name) in the phone book entry list.
8. Press Menu/OK.
9. Select the labeled category that includes your desired phone number. Then display
shows "Voice Dial Recorded".
Reviewing Voice Dialing Entries
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight VoiceService, and press Menu/OK.
3. Highlight Voice Dial, and press Menu/OK.
4. Highlight Review or Review: Speaker, and press Menu/OK.
5. Highlight the desired entry and press
or
Highlight the desired entry and press Options (right softkey). Highlight Play, and
press Menu/OK.
l Highlight Erase at the step 5 above and then select Yes to erase voice dial tag.
Menu/OK.
65