Operating Instructions And Parts List - Sharp EC-6312P Operation Manual

OPERATING INSTRUCTIONS AND PART LIST
ON / OFF SWITCH
With the cord plugged into an elec-
trical outlet, start or stop the
vacuum cleaner by pressing the
switch.
TELESCOPIC PIPE
When extend or
shorten, push the
button.
Accessories
Telescopic
pipe
Floor nozzle
FLOOR NOZZLE
2-STEP FLOOR NOZZLE
Ideal for the daily cleaning of carpets and hard floors.
• Press the lever (A) for cleaning hard floors.
• Press the lever (B) for cleaning carpets.
B
4
CORD REWIND BUTTON
To rewind the cord, press the cord
rewind button while holding the plug.
If cord is not retracted completely, pull
it out a little and press the cord rewind
button again.
Switch
cord rewind
button
Air slide valve
Button
Carrying
handle
Case cover
release button
Dust
Indicator
A
Suction
hose
ON/OFF Power
switch
control
Cord rewind
button
HOW TO TIDY UP
1. Rewind the power cord first, then wind the suction hose
around the extension pipe.
2. Insert the holder in the hole
on the body as shown.
ACCESSORIES
Crevice tool
1
Use for door tracks, narrow spots,etc.
Soft brush with crevice tool.
2
Use for carved furniture, table tops,
etc.
Crevice tool
Soft brush
POWER CONTROL
To control suction
power, turn the
power control knob.
knob
Low:
For curtains and delicate materials.
Medium:
For deep-pile velvet carpets and
delicate carpeting.
High:
For ordinary carpets and floors.
AIR SLIDE VALVE
close
Open the controller
on the hose handle
to control the air or
to release any items
suck in the nozzle.
DUST INDICATOR
If dust indicator change to "red", the
bag is full and must be changed or
dispose the dust.
Holder
Hole
open