Enabling The Device Manager - Storage Navigator Secondary Window - Hitachi VSP Gx00 series System Administrator Manual

Enabling the Device Manager - Storage Navigator secondary window

The Device Manager - Storage Navigator secondary window must be enabled before it
can be used.
Before you begin
You must have Storage Administrator (View Only) role to perform this task.
■
Install and configure JRE.
■
Procedure
1. From the Settings menu, click Environmental Settings > Edit Information Display
Settings. The Edit Information Display Settings window opens.
2. In the Secondary window field, click Enable.
3. Click Apply.
Logging in to Device Manager - Storage Navigator
You can log in to Device Manager - Storage Navigator in different ways.
If you are an administrator, you can log in to Device Manager - Storage Navigator with a
one-time only initial login.
If you are a super-user, you can log in first to Device Manager - Storage Navigator to
create other user accounts.
If you are a Device Manager - Storage Navigator and storage system user or
administrator, you can log in normally.
Initial superuser login
Follow these instructions to log in as a superuser.
When logging on to Device Manager - Storage Navigator for the first time, you must log
on as a superuser to set up additional user accounts.
The superuser account has a built-in ID, which includes all permissions, and a default
password.
Procedure
1. Call your local service representative to obtain the superuser ID and default
password.
2. In your web browser, specify the URL for your SVP:
https://IP-address-or-host-name-of-SVP/sanproject/
To change the port number of the protocol from the initial value (443), specify the
following URL:
https://IP-address-or-host-name-of-SVP:port-number-of-the-protocol/
3. Log in with the superuser ID and password.
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
Enabling the Device Manager - Storage Navigator secondary window
Chapter 2: Preparing your management software
37