Table of Contents
Advertisement
ERROR MESSAGES
When an error message is displayed on the display, proceed as follows:
Display
Nothing is recorded.
BLANK
The disc is damaged or
the music information is
E-DISC
not written properly on the
disc.
The unit is malfunctioning
and will require service.
E-SYS
The temperature is too
E-TEMP
high.
E-TOC
The disc is damaged.
E-UTOC
The battery has run down.
Lo BATT
A disc has not been
No DISC
loaded.
Improper power is being
POWER?
supplied.
There is an error in the
?DISC
signal from the disc.
Meaning
Replace the disc with a
recorded disc.
Replace the disc.
For service, contact your
local Sharp authorized
servicer.
Turn off the power, and
wait for a while.
Replace the disc.
Charge the rechargeable
battery or replace the
alkaline battery (or use
the AC adaptor for power).
Load a disc.
Use one of the specified
power sources.
Replace the disc.
19
Remedy
MD-S301
Advertisement
Table of Contents
