Ptt-Id (For Mdc And Dtmf Modes Only); Call Alert - Motorola PM1500 User Manual

General Radio Features

PTT-ID (For MDC and DTMF Modes only)

This stands for Push-to-Talk ID. This feature is programmed as
needed for each channel by your system manager.
If this feature is made available for your talkgroup, it allows you to see
the ID number of the radio from which you are receiving a
transmission. This ID could be up to eight characters in length and is
shown on your display as well as on your dispatcher's display.
In addition, your radio ID number is automatically sent when you
transmit.

Call Alert

The Call Alert feature allows a radio to selectively alert another radio,
and to determine whether or not that radio received the alert. A Call
Alert page can be initiated, depending on the signaling (MDC, QCII or
DTMF) that has been preprogrammed on the channel, after an
unsuccessful Selective Call or as a separate feature.
The PM1500 Controller Head is capable of responding to a Call Alert
initiated by another radio. It features a unique list of up to 100
preprogrammed ID numbers. A name can be assigned to each ID in
the list for your convenience.
26