Advanced Picture Adjustments; Color Temperature; Black; Fine Motion Advanced - Sharp AQUOS LC-46D82U Operation Manual

Basic adjustment settings
This TV provides various advanced functions for
optimizing the picture quality.
Press MENU to display the MENU screen,
and then press 4/1_ to select "Picture".
Press A/Y to select "Advanced", and then
press ENTER.
Press A/_' to select a specific adjustment
item, and then press ENTER.
• You can select "Color Temp.", "Black", "Fine
Motion Advanced", "3D-Y/C", "Monochrome",
"Film Mode" or "Range of OPC".
Press A/V (or 4/11_) to select the desired
parameter.
See the table for the selectable parameters.
Press MENU to exit.
Provides high quality images with minimal dot crawl
and cross color noise.
i_i_iii_i_i_ilili_!!i_!_'!!!i!_!!_!!_!!_!!_!!_!!_!!@i i
Standard
Fast
Slow
Normal adjustment
For moving images
For still images
3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
to
On For viewing in monochrome
Off Normal color
For a better white balance, use color temperature
correction.
High White with Bluish tone
Mid-High
Middle I
Mid-Low
Low White with Reddish tone
Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.
iilili iiiililili iilili iiiililili iiiiiii iil
On For high detail in black portions
Off No adjustment
Use Fine Motion Advanced to view fast-action video
more clearly.
On For obtaining a clearer image
Off Normal image
Fine Motion Advanced may cause image noise. If this
occurs turn the function "Off".
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
On Detects, analyzes, converts film
source
Off Normal viewing mode
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of € 16 and a minimum of
-16.
Max. 15 through + 16
Min. 16 through + 15
The range of OPC settings are active only when the OPC is
set to On.
The maximum setting cannot be set to a smaller number
than the minimum setting.
The minimum setting cannot be set to a bigger number
than the maximum setting.
Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Q- 27