Before Using The Lcd Tv Set - Sharp Aquos LC 20D30U Operation Manual

Before Using the LCD TV Set

To use your LCD TV set, perform steps below.
1
Check the supplied accessories. (See page 6.)
2
Insert two "AAA" size batteries into the remote control. (See page 8.)
• Open the battery cover, and then insert batteries with their terminals corresponding to the (+) and (-) indications in the
battery compartment.
3
Open the terminal cover. (See page 9.)
• Pull down the hook located on the upper side of terminal cover to open the cover.
4
Connect the antenna cable. (See page 9.)
5
Connect with external devices. (See page 14.)
INPUT1 Terminal (COMPONENT)
Terminal for component connection.
INPUT2 Terminal
Terminal for S-video connection.
6
Connect the AC cord to the AC INPUT terminal of the LCD TV set and plug in the AC cord to the wall outlet.
(See page 10.)
7
Turn on the main power. (See page 17.)
Press POWER on the upper side of the main unit.
The POWER/WAKE UP TIMER indicator located on the front of the main unit changes from red to green.
8
Start EZ SETUP. (See page 15.)
• The broadcasting channels and clock will be memorized automatically.
POWER
INPUT4 Terminal (HDMI)
Terminal for HDMI connection.
INPUT5 Terminal
Terminal for PC connection.
INPUT3/OUTPUT Terminal
Terminal for INPUT/OUTPUT connection.
POWER/WAKE UP TIMER indicator
7