Checking Wiring And Connectors; Exhaust Leakage; Water Leakage - Yamaha E8D Owner's Manual

8
9.9, 15
q
4-17
2) Adjust the throttle stop-screw 1 to set
q
NOTE:
Correct idling-speed adjustment is only pos-
001341
sible if the engine is fully warmed-up. If not
warmed up fully, the speed setting will tend
to be too high. If you have difficulty obtain-
ing the specified idle, consult a Yamaha
dealer or other qualified mechanic.
001260
EMU00383
CHECKING WIRING AND
CONNECTORS
1) Check that each grounding wire is
2) Check that each connector is engaged
EMU00384

EXHAUST LEAKAGE

606011
Start the engine and check that no exhaust
leaks from the joints between the exhaust
cover, cylinder head and crank case.
EMU00385

WATER LEAKAGE

Start the engine and check that no water
leaks from the joints between the exhaust
cover, cylinder head and crank case.
the idling speed to specification (see
"SPECIFICATIONS" on page 4-1) by
turning the stop-screw clockwise to
increase the idling speed, and turning it
counterclockwise to decrease the idling
speed.
properly secured.
securely.
E