Table of Contents
Advertisement
User Information Guide – Protective Helmets for Structural Firefighting
Warranty
Honeywell warrants that all
Morning Pride by Honeywell First
Responder Products protective
helmets are free from defects in
material and workmanship for the
useful life of the product. The end
user is STRONGLY CAUTIONED
not to install any accessory
piercing the shell. This warranty
specifically excludes accidental
damage (e.g., exposure to acid,
being run over by apparatus),
intentional or unintentional
abuse, natural disasters, damage
caused by disregard of care
instructions, and normal wear.
Hot Fire Training Damage – This
helmet meets the NFPA 1971
standard for high convective and
radiant heat resistance. These
tests will damage the helmet. To
avoid similar damage in training
exercises (flashover and/or high
heat training), always use an
aluminized helmet cover. Any
heat damage to a helmet without
an aluminized cover during such
training voids all warranties,
express or implied.
THESE WARRANTIES ARE
EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES,
WHETHER WRITTEN, EXPRESS,
IMPLIED, STATUTORY, OR
OTHERWISE. A full warranty
statement can be found at:
www.HoneywellFirstResponder.com
Contact Information
If you have questions or
require more information,
contact Honeywell First
Responder Products.
Honeywell First Responder Products
#1 Innovation Court
Dayton, OH 45414
Tel: 800-688-6148
ISO 9001:2015
www.HoneywellFirstResponder.com
99-BK-S07-EV1
Rev. March 2018
© 2018 Honeywell International Inc.
Advertisement
Table of Contents
