Service Data; Installation - Zanussi ZOB31301WK User Manual

Problem
The oven does not heat up.
The lamp does not operate.
Steam and condensation settle
on the food and in the cavity of
the oven.

SERVICE DATA

If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

WARNING! Refer to Safety chapters.
16
Possible cause
The fuse is blown.
The lamp is defective.
You left the dish in the oven for
too long.
We recommend that you write the data here:
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Replace the lamp.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
the appliance cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
Remedy