Philips Norelco QP2630 Instructions page 4

Do not tap the product or blade against a
surface to remove hairs and water as this
may cause damage to the product and
blade (Fig. 21). If the blade is damaged,
replace immediately.
Never dry the blade with a towel or tissue,
as this may cause damage.
Cleaning the product
1 Switch the product off.
2 Remove any comb or skin guard from the
blade (Fig. 15).
3 Blow off any hairs that have accumulated
on the blade and/or combs.
4 Switch on the product for approx.
15 seconds while rinsing the blade with
lukewarm water (Fig. 22).
5 Rinse the combs for approx. 15 seconds
with lukewarm water.
6 Carefully shake off excess water and let
all parts air dry completely.
Note: The blade is fragile. Handle it
carefully. Replace the blade immediately if
it is damaged.
This product has no other user-serviceable
parts. For assistance call 1-800-243-3050.
Storage
Always attach the protective cap on the
blade to protect the blade from damage
during traveling or storage.
Attach the click-on body comb on the body
blade to protect the blade from damage.
Make sure the product and attachments are
completely dry before you store them for
the next use.
1 Place the protective cap onto the edge
of the blade (Fig. 23).
2 Close the protective cap (Fig. 24).
- Be sure the product is switched off.
Remove cord from outlet and the
product before storing it in a safe, dry
location where it will not be crushed,
banged, or subject to damage.
- Do not wrap cord around the product
when storing.
- Store cord in a safe location where it will
not be cut or damaged.
- Do not place or store the product where
it can fall or be pulled into a tub or sink,
water or other liquid while plugged in.
Blade wear indicator
For optimal cutting and gliding performance,
replace the blade every 4 months or when it no
longer provides the shaving or trimming results
you expect. This advice is based on two full
shaves a week and actual results may vary.
The blade is equipped with a blade wear
indicator. A green bar will gradually appear
on the blade as you use it (Fig. 25). When
it is highly visible, it is recommended to
replace your blade for the best OneBlade
experience. Always replace the blade with
original Philips Norelco blade (see
'Accessories').
Depending on your usage behavior, the
exact lifetime of the blade could be longer
or shorter. Similar to a manual blade, the
blade becomes blunt over time, which
results in increased hair pulling and reduced
cutting performance.
Replacement
Replacing the blade
1 Switch the product off.
2 Carefully push the blade release slide
switch upwards while holding the blade
on both sides (Fig. 26). This will prevent
the blade from flying away.
3 Hold the new blade on both sides and
press it onto the handle ('click') (Fig. 27).
Note:Be careful, the edges of the blade are
sharp. When you hear a click, the new blade
is placed correctly and ready for use.
Accessories
Replacement parts and accessories may
be purchased at a store near you or on our
website www.philips.com/store.
The following accessories are available:
- Model QP210 Philips Norelco
Replacement Blade, 1-Pack
- Model QP220 Philips Norelco
Replacement Blade, 2-Pack
- Model QP230 Philips Norelco
Replacement Blade, 3-Pack
- Model QP610 Philips Norelco Body kit
- Model QP620 Philips Norelco Face and
Body kit
Assistance
For assistance, visit our website:
www.philips.com/support or call toll free
1-800-243-3050.
Online information is available 24 hours a
day, 7 days a week.
Disposal
- This product contains a rechargeable
lithium-ion battery which must be
disposed of properly.
- Contact your local town or city officials
for battery disposal information. You can
also call 1-800-822-8837 or visit
www.call2recycle.org for battery drop-
off locations (Fig. 28).
- For assistance, visit our website
www.philips.com/support or call
1-800-243-3050 toll free.
- Your product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused. For recycling information,
please contact your local waste
management facilities or visit
www.recycle.philips.com.
Full Two-Year Warranty
Philips North America LLC warrants this new
product (except blade, combs and skin guard)
against defects in materials or workmanship
for a period of two years from the date of
purchase, and agrees to repair or replace any
defective product without charge.
IMPORTANT: This warranty does not cover
damage resulting from accident, misuse or
abuse, lack of reasonable care, the affixing
of any attachment not provided with the
product or loss of parts or subjecting the
product to any but the specified voltage or
batteries.*
NO RESPONSIBILITY IS ASSUMED
FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
In order to obtain warranty service, simply
go to www.philips.com/support for
assistance. It is suggested that for your
protection you return shipments of product
by insured mail, insurance prepaid. Damage
occurring during shipment is not covered by
this warranty.
NOTE: No other warranty, written or oral, is
authorized by Philips North America LLC.
This warranty gives you specific legal rights,
and you may also have other rights which
vary from state to state. Some states do
not allow the exclusion or limitation of
incidental or consequential damages, so the
above exclusion and limitations may not
apply to you.
*Read enclosed instructions carefully.
45-DAY MONEY-BACK GUARANTEE
If you are not fully satisfied with your
product send the product back and we'll
refund you the full purchase price.
The product must be shipped prepaid
by insured mail, insurance prepaid, have
the original sales receipt, indicating
purchase price and date of purchase,
and the money-back guarantee return
authorization form enclosed.
We cannot be responsible for lost mail.
The product must be postmarked no later
than 45 days after the date of purchase.
Philips reserves the right to verify the
purchase price of the product and limit
refunds not to exceed suggested retail
price.
To obtain money-back guarantee return
authorization form, call 1-800-243-3050
for assistance.
Delivery of refund check will occur
6–8 weeks after receipt of returned product.