Table of Contents
Advertisement
Quick Links
Please read this owner's manual carefully before
operating the Monitor.
Retain it for future reference.
Record model number and serial number of the
Monitor.
See the label attached on the back of the Monitor
and quote this information to your dealer when you
require service.
DPDP60W
Model number : DPDP60W
Serial number :
OWNER'S MANUAL
ON/OFF
INPUT SELECT
VOLUME
Advertisement
Table of Contents
Related Manuals for Zenith DPDP60W
Summary of Contents for Zenith DPDP60W
- Page 1 Record model number and serial number of the Monitor. See the label attached on the back of the Monitor and quote this information to your dealer when you require service. DPDP60W Model number : DPDP60W Serial number : OWNER’S MANUAL ON/OFF INPUT SELECT VOLUME...
- Page 2 FCC NOTICE • DPDP60W : A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 3: Table Of Contents
Table of Contents First step WARNINGS ..............4 SAFETY INSTRUCTIONS........5 Composition Front Panel Controls ..........8 Connection Panel Overview ........9 Remote Control Key Functions/Accessories ..10 Installation of the monitor ........12 Connection VCR Setup..............14 Cable TV Setup ............15 External AV Source Setup ........16 DVD Setup..............17 DTV Setup ..............18 PC Setup ..............19... -
Page 4: Warnings
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product. The responsible party for this device compliance is:... -
Page 5: Safety Instructions
SAFETY INSTRUCTIONS Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. - Page 6 SAFETY INSTRUCTIONS (Continued from previous page) The openings should never be blocked by supporting structure, grounding of the lead- placing the product on a bed, sofa, rug, or in wire to an antenna discharge unit, size of other similar surface. This product should grounding conductors, location of antenna- not be placed in a built-in installation such discharge unit, connection to grounding...
- Page 7 product through openings as they may 22. Safety Check touch dangerous voltage points or short-out Upon completion of any service or repairs to parts that could result in a fire or electric this product, ask the service technician to shock. Never spill liquid of any kind on the perform safety checks to determine that the product.
-
Page 8: Front Panel Controls
Front Panel Controls <Front Panel> ON/OFF ON/OFF INPUT SELECT VOLUME Main power button Power standby indicator Illuminates red in standby INPUT Illuminates green when the SELECT VOLUME Monitor is switched on INPUT SELECT button Sub power button VOLUME ( ) buttons Remote control sensor... -
Page 9: Connection Panel Overview
Connection Panel Overview <Back Panel> AUDIO VIDEO (MONO) AUDIO RGB-PC INPUT COMPONENT (480i/480p/720p/1080i) (VGA/SVGA/XGA/SXGA) AV INPUT RGB-DTV INPUT AUDIO INPUT S-VIDEO EXTERNAL SPEAKER (8Ω) AC INPUT (DVD/DTV INPUT) (480p/720p/1080i) VIDEO AUDIO (MONO) AUDIO RGB-PC INPUT COMPONENT (480i/480p/720p/1080i) (VGA/SVGA/XGA/SXGA) AV INPUT AUDIO INPUT AC INPUT EXTERNAL SPEAKER 8Ω... -
Page 10: Remote Control Key Functions/Accessories
Remote Control Key Functions/Accessories - When using the remote control aim it at the remote control sensor on the Monitor. power on button power on system off sleep button (Refer to p.34) sleep mute mute button switches the sound on or off. number buttons video/pc menu... - Page 11 INPUT SELECT button on the system off button remote control Each press of this button changes the mode as below. No function VIDEO COMPONENT menu button enter button up/down buttons vol buttons twin picture button(Refer to p.28) When pressing this button, it’s displayed on screen.
-
Page 12: Installation Of The Monitor
- Use this product at the place lower than the altitude of 6562 feet (2000m) to get the best quality of picture and sound. - Your DPDP60W (Monitor) can be installed on a wall as shown below, or on a desktop pedestal as shown on the next page. Wall Mount Installation... - Page 13 Desktop Pedestal Installation ON/OFF INPUT SELECT VOLUME • The Monitor can be installed on the desk as shown above. (For further information, refer to the optional ‘Desktop stand Installation and Setup Guide’.) (In case of desktop type) 3.94inch 1.18inch 3.94inch 3.94inch 2.36inch...
-
Page 14: Vcr Setup
VCR Setup - As shown below, when connecting the Monitor to a VCR, match the colors of AV input jacks on the Monitor with the output jacks on the VCR: Video = yellow, Audio (Left) = white, Audio (Right) = red. - If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Plasma Monitor. -
Page 15: Cable Tv Setup
Cable TV Setup - After subscribing to a cable TV service from a local provider and installing a converter you can watch cable TV programming. AUDIO (MONO) VIDEO AUDIO RGB-PC INPUT COMPONENT (480i/480p/720p/1080i) (VGA/SVGA/XGA/SXGA) AV INPUT RGB-DTV INPUT AUDIO INPUT S-VIDEO EXTERNAL SPEAKER (8Ω) AC INPUT... -
Page 16: External Av Source Setup
External AV Source Setup - As shown below, when connecting the Monitor to an external source, match the colors of AV input jacks on the Monitor with the output jacks on the audio/video equipment: Video = yel- low, Audio (Left) = white, Audio (Right) = red. AUDIO (MONO) VIDEO... -
Page 17: Dvd Setup
DVD Setup How to connect a DVD (digital video disk player) • Connect DVD video inputs to Y, P of COMPONENT (480i/480p/720p/1080i) (DVD/DTV INPUT) and audio inputs to Audio sockets of AV INPUT. AUDIO (MONO) VIDEO AUDIO RGB-PC INPUT COMPONENT (480i/480p/720p/1080i) (VGA/SVGA/XGA/SXGA) AV INPUT (DVD/DTV INPUT) -
Page 18: Dtv Setup
DTV Setup - To watch digitally broadcast programs, purchase/connect a digital SET-TOP BOX. - If the DTV signal is input to the Monitor, you can adjust the picture size. - You can select only the 16:9 picture format in DTV 720p/1080i mode. How to connect a user-supplied Digital Set-top Box •... -
Page 19: Pc Setup
PC Setup See your computer’s image on the Monitor. How to connect Make the connections shown in the illustration below • Set the computer video output to UXGA; for the best picture quality. (If the video output of the PC is not compatible with the Monitor, no picture will appear on the Monitor. See page 20.) •... - Page 20 Monitor Image Display Specifications Horizontal Vertical Resolution Frequency (KHz) Frequency (Hz) 31.468 70.09 640x350 37.861 85.08 31.469 70.08 720x400 37.927 85.03 31.469 59.94 35.000 66.66 37.861 72.80 37.500 75.00 640x480 43.269 85.00 45.913 90.03 53.011 100.04 64.062 120.00 35.156 56.25 37.879 60.31 72.18...
-
Page 21: Pc Computer Mode Feature Check
PC Computer Mode Feature Check - Select first, see page 11. Press the menu button to show menus on screen. menu Press the up/down button to select menus. • Each press will cycle through the different menus as shown below. PICTURE down CONTRAST... -
Page 22: Pc Computer Mode Adjustments
PC Computer Mode Adjustments Auto adjustment - The position and trembling of picture is automatically adjusted. Press the menu button and then press the up/down button SPECIAL to select menu. Press the vol ( ) button. menu down Press the up/down button to select SCREEN and then press the vol ( ) button. - Page 23 PC Computer Mode Adjustments Adjusting horizontal / vertical postion Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( ) button. menu down Press the up/down button to select SCREEN and then press the vol ( ) button.
- Page 24 Picture Phase Adjustments • If the picture isn’t clear after auto adjustment and especially if the characters are still trembling, then adjust the picture phase manually. Press the menu button and then press the up/down button SPECIAL to select menu. Press the vol ( ) button.
-
Page 25: Pip Function
PIP function - Make sure to select RGB before operating. - This function works only in the following resolution; 640x480, 800x600, 1024x768(only in Vertical frequency 60 Hz) - When you select RGB or DTV for main picture in PIP/Twin picture, you can watch video, cable TV or DVD for sub picture. - Page 26 Selecting the input signal input select Press the input select button in PIP mode. • Each time you press input eslect button, you can select VIDEO COMPOENT alternatively. VIDEO COMPONENT In case of COMPOENT , this function works only in 480i mode. PIP INPUT VIDEO Moving the Sub picture...
- Page 27 PIP function Selecting the sound items - This function works only in the following resolution; 640x480, 800x600, 1024x768(only in Vertical frequency 60 Hz) - To use this function, connect PC/DTV video input to RGB-PC INPUT(VGA/SVGA/XGA/SXGA) RGB-DTV INPUT(480p,/720p/1080i) socket and connect PC/DTV audio inputs to AUDIO INPUT.
-
Page 28: Twin Picture Function
Twin picture function - Make sure to select before operating. - This function works only in the following resolution; 640x480 (only in Vertical frequency 60 Hz) twin picture Press the twin picture button. twin picture • Each time you press button, you can select Main picture... - Page 29 Selecting the input signal input select Press the input select button in TWIN PICTURE mode. • Each time you press input eslect button, you can select VIDEO COMPOENT alternatively. VIDEO COMPONENT In case of COMPOENT , this function works only in 480i mode. PIP INPUT VIDEO...
-
Page 30: Using The Remote Control
Using the remote control Installing batteries • Open the battery compartment cover on the back of the remote control and insert the batteries with correct polarity, match “+” with “+”, and match “-” with “-”. • Install two 1.5V “AA” alkaline batteries. Don’t mix the used batteries with new batteries. -
Page 31: Turning On The Monitor
Turning on the Monitor - When using the remote control, aim it at its sensor on the Monitor. Turning on the Monitor just after installation Connect power cord correctly. Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. -
Page 32: Selecting Language For The Menus
Selecting language for the menus Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( ) button. menu down Press the up/down button to select SPECIAL LANGUAGE and then press the LANGUAGE LANGUAGE ˙–... -
Page 33: Checking Features
Checking features menu Press the menu button. Press the up/down button. • Each press will cycle through the menus shown below. down PICTURE CONTRAST BRIGHTNESS COLOR TINT SHARPNESS MOVE NEXT EXIT <Picture menu> SOUND DASP TREBLE BASS BALANCE MOVE NEXT EXIT <Sound menu>... -
Page 34: Setting Sleep Time
Setting sleep time <This feature automatically turns the Monitor off after a preset time.> Press the sleep button to set sleep time. sleep Each time you press the next preset setting time is changed as shown below. SLEEP • To release sleep time setting, press the sleep or vol button repeatedly to select Tips •... -
Page 35: Auto Picture Control
Auto picture control < APC sets the Monitor with the best picture appearance > - This function isn’t select in RGB, PIP/TWIN PICTURE. APC (Auto Picture Control) Press the apc button. Press the apc or vol button to select your desired picture condition. -
Page 36: Adjusting Picture Appearance
Adjusting picture appearance - You can’t adjust contrast, brightness, color, tint, sharpness in sub picture for PIP / Twin picture. Press the menu button and then press the up/down button to select PICTURE menu. Press the vol ( ) button. menu down Press the up/down button to select... -
Page 37: Drp (Digital Reality Picture)
DRP (Digital Reality Picture) < This function stresses picture outline in showing a dark area light > Press the menu button and then press the up/down button to PICTURE select menu. Press the vol ( ) button. menu down Press the up/down button to select PICTURE and then press the vol ( ) button. -
Page 38: Selecting Screen Item
Selecting the screen item - This function work only in video mode. Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( ) button. menu down Press the up/down button to select SPECIAL SCREEN and then press the... -
Page 39: Adjusting Sound Appearance
Adjusting sound appearance Press the menu button and then press the up/down button to SOUND select menu. Press the vol ( ) button. menu down Press the up/down button to select SOUND TREBLE and then press the vol ( DASP button. -
Page 40: Auto Sound Control
Auto sound control DASP • This function lets you enjoy the best sound without any special adjust- ment because the Monitor automatically adjusts the sound appropriate to viewing program character by self-intelligence. easy sound Press the easy sound button. Press the easy sound or vol button to select your desired sound. -
Page 41: Avl (Auto Volume Leveler)
AVL (Auto Volume Leveler) < This function keeps on an equal volume level even if you change channels> - This function works only in case of connecting a cable box with the monitor. Press the menu button and then press the up/down button to SOUND select menu. -
Page 42: Using Still Function
Using Still function - This function doesn’t work in RGB. Press the freeze button. freeze • You can still the current picture. • The sub picture is stilled in PIP or Twin picture mode. <Moving image> <Still image> To finish this function, press the freeze button again. Tips •... -
Page 43: Adjusting Osd Transparency
Adjusting OSD Transparency Press the menu button and then press the up/down button to SPECIAL select menu. Press the vol ( ) button. menu down Press the up/down button to select SPECIAL TRANSPARENCY and then press the LANGUAGE vol ( ) button. -
Page 44: Setting Picture Format
Setting picture format - You are available to 16:9 or 4:3 in RGB and 16:9 is only available in DTV 720p/1080i. - If 4:3 is on the screen for a long time, that fixed image may remain visible. ratio Press the ratio button to select a desired picture format. -
Page 45: Maintenance
Maintenance - Early malfunction can be prevented. Careful and regular cleaning can extend the amount of time you will have with your new Monitor. Be sure to turn the power off and pull out the plug before you begin any cleaning. Cleaning the screen 1. -
Page 46: Troubleshooting Check List
Troubleshooting check list • Check whether the Monitor is turned on. No picture & • Check the power cord. No sound • Plug another product’s power cord into the wall outlet where the Monitor’s power cord was plugged in. Picture OK & •... -
Page 47: Product Specifications
Product specifications MODEL DPDP60W Width (inches) 57.3 Height (inches) 34.8 Depth (inches) Weight (pounds) 154.3 Power consumption (watts) Power requirement AC 120V ~ 60Hz Resolution 1280 x 720 (Dot) Color 16,770,000 (256 steps of each R, G and B) • This product specifications above can be changed without notice for quali-... - Page 48 P/NO : 3828VA0277B (NP00KA)