Step 2 Mount The Cooler - Fujitsu SMARTCASE S500 Assembly Instructions Manual

Assembly Instructions SMARTCASE S500

Step 2 Mount the Cooler

Before mounting the board into the chassis, it is necessary to add hardware to it first (CPU, Cooler, RAM, plus any
optional additional hardware). First start with the back plate, which is essential for the cooler.
Do not take the stripe off the back plate for sticking it onto the backside of the board. The sticker is necessary for
isolation and safety.
__________________________________________________________________________________________________________________________________________________________
Page 4 of 23
Back plate
Place the back plate underneath the board.
The side with the indentation has to be positioned
directly under the screw. The end of the back
plate's notches should be visible after the process.
www.fujitsu.com