Epson TM-L60 Operator's Manual page 47

The transmitted status is only one byte and the data is as shown
[Notes]
l
If nothing is connected with Drawer kick-out connector, bit 0 of n
l
When DTR/DSR control is selected, one byte is transmitted af-
l
ter confirming that the host computer is ready to receive data
When XON/XOFF control is selected, one byte is transmitted
l
When DTR/DSR control is selected, if the host computer is not
l
ESC v
[Name] Transmit printer status
[Format] <1B>H<76>H
The current printer status is transmitted to the host computer.
[Description]
[Notes]
l
l
l
l
in the following table.
is always "1".
(DSR is SPACE).
without checking the DSR signal.
ready to receive data (DSR is MARK), the printer waits until it
becomes ready.
B i t
Function
0 Pin 3 level
Undefined
1
2 Undefined
Undefined
3
4
Unused
Undefined
5
Undefined
6
Undefined
7
The transmitted status is only one byte and the data is as shown
in the following table.
When DTR/DSR control is selected, one byte is transmitted af-
ter confirming that the host computer is ready to receive data
(DSR is SPACE).
When XON/XOFF control is selected, one byte is transmitted
without checking the DSR signal.
When DTR/DSR control is selected, if the host computer is not
ready to receive data (DSR is MARK), the printer waits until it
becomes ready.
V a l u e
0
"LOW"
Fixed to 0
41
1
"HIGH"