Page 1
TS100 TALKINGSIGN TRANSMITTER USER MANUAL (PRELIMINARY) REV 1.0...
Page 2
Consider also, that if the nature of your business is local - what good does it do to be seen worldwide but go unnoticed by your immediate customers? What is needed is a technique that promotes your site in an effective, affordable manner. The TalkingSign™ transmitter is just such a device.
Page 3
Fully FCC/ ICES approved requires no license to operate. Easy to use, only taking minutes to set up. The TalkingSign™ is usually located in a house or business with a sign out front requesting the customer tune their AM radio to a certain frequency to listen for information.
Page 4
- and they can do this in private without feeling pressured by salespeople. They can also visit the TalkingSign.com web site later to look at pictures, testimonials etc. of Acme Windows.
Page 5
Front drawing of unit LIVE button STOP button PLAY button REC button Wire antenna tuning meter Rear drawing of unit Wire antenna tuning control Wire antenna/50 ohm remote antenna selector Antenna ‘hundreds’ frequency select ‘tens’ frequency select 12 VDC power input Front panel controls lock Internal speaker volume control LINE input from tape deck, CD etc.
Page 6
Setup You should have received the following items: TalkingSign™ transmitter 120VAC to 12VDC wall adapter wire antenna lapel microphone owner’s manual Step 1 Plug antenna wire into antenna (3) and extend out horizontally. Step 2 Select ‘3m wire’ with antenna selector (2) Step 3 Connect wall adapter to 12VDC input (6).
Page 7
Record Message Using Lapel Microphone The TalkingSign™ stores messages digitally with no moving parts to wear out. Your recorded message time may be any time up to 5 minutes and on playback, the message will continuously repeat regardless of length with no ‘dead-air’ time.
Page 8
Record Message From An External Device The TalkingSign™ may also record from an external device such as a tape deck or CD player. Step 1 Attach a ‘patch cord, (not supplied) from the line/audio out of the external player to the LINE IN (9) of the TalkingSign™.
Page 9
Broadcast Live The TalkingSign™ may also be used to continuously broadcast audio with no recording occurring. Step 1 Switch the control lock switch (7) to the unlocked position. This activates the front panel buttons (a-d). Step 2 Connect the lapel microphone to MIC (10) and/or connect an external audio player to LINE IN (9).
Specifications 30 channel PLL quartz synthesizer 1400kHz to 1690kHz AM 100mW maximum output power Power: 12VDC or 120VAC with wall adapter Line input 1Vpp (0dBm) nominal for 85% modulation Microphone input Internal speaker with volume control 5 minute message length Message storage: flash digital memory chips 3 metre flexi-wire antenna Dimensions: 9.1”...
Electrical Safety Approvals UL1950, CSA, CE, CB, T-Mark WARNING: To prevent fire or electric shock, only use in a dry location! No adjustments or user-serviceable parts within unit. Refer all servicing to service@talkingsign.com...
For repair inquiries, email to service@talkingsign.com. For warranty coverage, a dated bill of sale is required as proof . This warranty does not apply to a TalkingSign™ transmitter or part thereof which has been damaged through alterations, mishandling, misuse, neglect or accident.