Summary of Contents for Tripp Lite WorkWise WWSSRC
Page 1
Model: WWSSRC Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: www.tripplite.com Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com...
PRODUCT REGISTRATION Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary.
Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/ support for service. Packet A M6 x 12 M6 x 25 M6 x 40 M6 x 35 M6 x 50 Hex Key...
Page 4
Assembly Note: Do not tighten screws. Leave approximately 5/64 in. (2 mm) of exposed thread. Note: Do not tighten screws. Leave approximately 5/64 in. (2 mm) of exposed thread. 18-04-006-933849-EN.indd 4 4/12/2018 10:29:42 AM...
Page 5
Assembly “L” Dimensions should be equal. Keep the same plane. Note: Verify all holes are properly aligned, then tighten screws. 18-04-006-933849-EN.indd 5 4/12/2018 10:29:43 AM...
Page 7
Assembly Note: Verify all holes are properly aligned, then tighten screws. 18-04-006-933849-EN.indd 7 4/12/2018 10:29:46 AM...
Page 8
Assembly Note: Verify all holes are properly aligned, then tighten screws. 18-04-006-933849-EN.indd 8 4/12/2018 10:29:47 AM...
Page 9
Assembly Note: Pull up the worktable to its maximum height, then lower it to its lowest position. Repeat this adjustment several more times. 18-04-006-933849-EN.indd 9 4/12/2018 10:29:47 AM...
Assembly Turn the bottom nut COUNTER- CLOCKWISE to loosen. Turn the top nut CLOCKWISE to tighten. Note: Make sure all casters are at the same height. If the casters are not at the same height, one or two of the casters can be adjusted as shown in figure Maintenance •...