On-Off Switch - Craftsman 113.2433 Owner's Manual

assembJy
ON-OFF SWITCH
WARNING: DON'T CONNECT POWER COR D TO
ELECTRICAL OUTLET IN YOUR SHOP UNTIL
YOU ARE SURE THAT MOTOR ROTATION IS
CORRECT. (SEE PAGE 5).
The On-Off Switch has a locking feature, THIS FEATURE
IS INTENDED TO PREVENT UNAUTHORIZED AND
POSSIBLY HAZARDOUS USE BY CHILDREN AND
OTH E RS.
1. Insert key into switch.
Rk_k
NOTE:
Key is made of yellow plastic
2. To turn machine on. insert finger under switch lever and
pull end of switch out.
f
3. To turn machine OFF. . PUSH lever in.
Never leave the machine unattended until it has come
to a complete stop, Remove key and store remote from
band saw.
4. To lock switch in OFF position.., hold switch IN wi_h
one hand. ,. REMOVE key with other hand.
WARNING: FOR YOUR OWN SAFETY,
ALWAYS LOCK THE SWITCH "OFF" WHEN
MACHINE IS NOT IN USE . . . REMOVE KEY
AND KEEP IT IN A SAFE PLACE. ,. ALSO. ,.
IN THE EVENT OF A POWER FAILURE (ALL
OF YOUR LIGHTS GO OUT) TURN SWITCH
OFF . . . REMOVE THE KEY. THIS WILL
PREVENT THE MACHINE FROM STARTING
UP AGAIN WHEN THE POWER COMES BACK
ON.
/
/
/
/
/
4OLD /
I
16